Omnipod® 5 FAQs: Glucose Monitoring

No, the Omnipod® 5 System does not have integration with a blood glucose meter. The Omnipod® 5 System integrates with the leading sensor brands.

The Omnipod® 5 System can be used with or without a CGM but to benefit from automated insulin delivery, it must be paired with a compatible sensor. Please discuss with your healthcare provider at the next planned consultation to determine which product is right for you.

The Omnipod® 5 System is compatible with the leading sensor brands.

People living with diabetes now have the choice to start on Omnipod 5 with the FreeStyle Libre 3 Plus sensor. The FreeStyle Libre 3 Plus sensor integration also supports the LibreLinkUp caregiver solution.

Omnipod 5 with the FreeStyle Libre 3 Plus Sensor integration requires a new, compatible Pod, therefore depending on how your Trust purchase, a new Purchase Order may be required. Please contact UKPO to confirm requirements.

Yes. With the introduction of the FreeStyle Libre 3 Plus Sensor integration, there will be new Omnipod 5 Pods compatible with both the FreeStyle Libre 2 Plus and FreeStyle Libre 3 Plus sensor as noted on the upper right corner of the box. The Omnipod 5 Pods compatible with Dexcom G6 and G7 do not support the FreeStyle Libre 2 Plus or FreeStyle Libre 3 Plus Sensor. For visual instructions on where to look on the packaging to see if you have the new Pods visit https://www.omnipod.com/en-gb/changingsensors

The new Omnipod 5 Pods compatible with the FreeStyle Libre 3 Plus sensor indicate this on the upper right corner of the box and the tray inside the box. The Omnipod 5 Pods compatible with Dexcom G6 and G7 do not support the FreeStyle Libre 2 Plus or FreeStyle Libre 3 Plus sensor. For visual instructions on where to look on the packaging to see if you have the new Pods visit https://www.omnipod.com/en-gb/changingsensors

Yes, the Omnipod 5 with FreeStyle Libre 3 Plus sensor integration is compatible with the LibreLinkUp caregiver solution. For instructions on how to link your accounts, please visit https://www.omnipod.com/en-gb/current-podders/resources/omnipod-5/faqs/librelinkup

Yes, existing users of Omnipod 5 System can switch sensor to use it with the FreeStyle Libre 3 Plus sensor. Omnipod 5 with the FreeStyle Libre 3 Plus Sensor integration requires a new, compatible Pod, therefore depending on how your Trust purchase, a new Purchase Order may be required. Please contact UKPO to confirm requirements.

The Omnipod 5 Controller displays glucose readings every 5 minutes which will continue with this integration. While the 1 minute glucose data is not displayed, there is one exception: if a 5-minute reading is missed and a 1-minute sensor value is available during the following cycle, the app will display the 1-minute value to ensure continuity of glucose data.

The connectivity experience with the FreeStyle Libre 3 Plus sensor integration is similar to that of the FreeStyle Libre 2 Plus sensor integration. While maintaining line of sight between Pod and sensor remains crucial, some key differences help improve performance. With the FreeStyle Libre 3 Plus sensor, the Pod receives a glucose reading every minute and can display any of those readings within a five minute interval, rather than relying solely on the fifth minute reading. This supports improved continuity of glucose data.

As with prior integrations, proper placement remains important. The Pod and sensor should be worn within line of sight of each other to ensure optimal communication and reliable data transmission. For more information on Pod and sensor placement, please refer to https://www.omnipod.com/en-gb/line-of-sight

Yes. While maintaining line of sight between Pod and sensor will remain crucial for an optimal connectivity experience, the Pod will now receive a glucose reading every minute from FreeStyle Libre 2 Plus and FreeStyle Libre 3 Plus sensors and can display any of these readings within a five minute interval, rather than relying solely on the five minute reading. This supports improved continuity of glucose data. As with prior integrations, proper placement remains important. The Pod and sensor should be worn within line of sight of each other to ensure optimal communication and reliable data transmission. For more information on Pod and sensor placement, please refer to https://www.omnipod.com/en-gb/line-of-sight

No, you will not be able to scan the FreeStyle Libre 3 Plus sensor with the Libre app in case of missing sensor values in the Omnipod 5 Controller. However, we have implemented updates on how sensor and Pod communicate to help improve connectivity performance. With the FreeStyle Libre 3 Plus sensor, the Pod receives a glucose reading every minute and can display any of those readings within a five minute interval, rather than relying solely on the fifth minute reading. This supports improved continuity of glucose data. As with prior integrations, proper placement remains important.

The Pod and sensor should be worn within line of sight of each other to ensure optimal communication and reliable data transmission. For more information on Pod and sensor placement, please refer to https://www.omnipod.com/en-gb/line-of-sight